Resin crafts production process - resin crafts production methods
First, the preparatory work
Prepare a shot weighing 5kg, spice bucket (or plastic basin), rice (or bamboo chopsticks), teaspoon (plastic, aluminum, porcelain spoon);
Second, spices
According to the size of the mold, the number of products made, first weighed unsaturated resin, (co) into the seasoning barrels, and then the curing agent () :(: accelerator) ratio, the first curing agent Unsaturated resin, fully stirred (), plus accelerators were stirred, fully mixed, diluted, (also stirred) and then add the material according to the desired color, (the amount of pigment can be added according to the different varieties Minus, to reach the required level, the general amount of large pigment can be) Add pigment with the resin used to open, including stirring, into the bucket and then stir evenly, the end of the material mixing After adding, add with stirring with the addition, until the required level so far. (A good mix of slurry should be sticky to spoon scoop up after pouring slowly)
Third, the mold
Mold should be placed flat, (horizontal state) mold inner mold surface should be cleaned, so that you can pour the system. Pour the system with a spoon scoop spoon a spoonful of spoon into the slowly pouring, can not be dumped, to pour from the highest point, so that it flows naturally, so you can squeeze the bubble away, otherwise, the finished product will have stomata. Note that when poured into the mold can not overflow the periphery of the mold, poured out of the periphery, should be immediately cleaned, eradication, or after molding to be processed, polished. Slurry into the mold after 1-2 hours to solidify, after solidification can be stripped |
